Summit 35 Specifications
Principle Dimensions
Lenghth Overall |
10.70 m |
35.09 ft |
Waterline Length |
9.20 m |
30.17 ft |
Beam |
3.48 m |
11.40 ft |
Draft |
2.20 m |
7.21 ft |
Displacement |
4,950 kgs |
10,920 lb |
Ballast |
2,400 kgs |
5,300 lbs |
Righting Moment @ 1 deg |
125 kg/m |
905 ft/lbs |
Sail Dimensions
I |
14.300 m |
46.90 ft |
J |
4.117 m |
13.50 ft |
P |
14.300 m |
46.90 ft |
E |
5.050 m |
16.56 ft |
LP |
104% |
|
STL |
5.650 m |
18.53 ft |
|
|
|
Headsail Area |
31.28 sm |
337 sf |
Mainsail Area |
44.16 sm |
479 sf |
Spinnaker Area - Sprit |
135 sm |
1410 sf |
Hull & Deck
- Vinylester resin with E-glass and foam composite infusion hull & deck
- Uni-directional, Bi-axial and Tri-axial E-glass fabrics
- Engineered & built to meet or exceed ABS & ISO Standards
- Complies with European RCD (CE Mark) Category A Standards
- SG Iron keel fin with lead bulb epoxy coated
- Anodized aluminum keel grid
- Gelcoat hull and deck
- Bonded hull to deck joint
- Structural GRP Interior Glass Unit bonded to hull
Propulsion & Steering
- Volvo 28 hp diesel engine with sail drive
- 115 Amp alternator
- 2-blade Volvo folding propeller
- Manual engine shift / throttle control
- 64 liter fuel tank (appx)
- Waterlift muffler
- Balanced carbon fiber spade rudder
- Upper and lower rudder bearings
- Custom tiller with adjustable offshore hiking stick
Electrical
-
12VDc system
-
115 Amp alternator
-
Batteries 2 each Group 29 sealed
-
Circuit Breaker Panel – six circuits
-
Battery Charger 40 amp / InverterBattery Switch – 4 position
-
DC Panel with 16 independent circuit breakers
-
LED Navigation lights
-
Reading spot light over each bunk (6)
-
Overhead lights (6)
-
Dome lights (2)
-
Chart Light
-
110 VAC shorepower system is an option
Plumbing & Stove
-
Water tank, 100 liters
-
Pressure cold water system with automatic 12 vdc pump
-
Galley sink with faucet
-
Head vanity sink with faucet
-
Marine toilet with 20 liter holding tank
-
Y-valve for overboard discharge or deck pump out
-
Manual diaphragm bilge pump in cockpit
-
Electric 12 vdc bilge pump
-
Ice box with 4” foam insulation and electric drain pump
-
Origo 2-burner non-pressurized gimbaled alcohol stove
Deck Hardware
- Harken racing blocks throughout
Winches:
- Primary Harken Radial 46.2STA
- Mainsheet Harken Radial 40.2STA
- Cabin Top Harken Radial 40.2STA
- Under deck mainsheet
- Under deck jib car adjusters with 10:1 purchase
- Under deck inahulers with 8:1 purchase
- Spinlock rope clutches for halyards
- Stainless steel bow rail, stern rail and stanchions
- Retractable s/s 8” foredeck cleat
- Foredeck hatch round Lewmar
- Vent hatches (2) Lewmar
- Opening ports (2) in Q-berths
- Fixed cabin ports
- Flush hatch garage
- Sliding hatch at companionway
Spars & Rigging by Southern Spars
- Aluminum 2-spreader mast, tapered
- Aluminum boom with 8:1 internal outhaul lead aft, mainsail reef clutch
- Discontinuous s/s rod rigging
- Custom s/s chainplates, headstay and backstay
- Double masthead spinnaker halyards
- Double hounds height jib halyards
- Mainsail halyard
- Solid mechanical vang 16:1 purchase lead aft P&S
- 1:64 Backstay
- Symmetric spinnaker with carbon pole & all rigging in lieu of sprit
Running Rigging
- Main halyard 8 mm Vectran with shackle (1)
- Jib halyard 8 mm Vectran with shackle (2)
- Spinnaker halyards 8 mm Spectra with Shackles (2)
- Mainsheet 10mm Sta-set braid (1)
- Jib sheets 10mm Sta-set braid with soft shackles (2)
- Traveller crosshauls 10 mm Dacron braid (2)
- Jib lead adjuster A 5 mm Spectra (2)
- Jib lead adjuster B 8 mm Dacron (2)
- Jib inhaul A 6 mm Spectra (2)
- Jib inhaul B 8 mm Dacron (2)
- Reef 10mm Sta-set braid (1)
- Tack line 8 mm Sta-set braid (1)
- Sprit launch 8 mm Sta-set braid (1)
- Spinnaker sheet 8 mm Spectra (2)
- Cunningham 5 mm Dacron 8:1 (1)
Accommodations
- Upholstery is 4” foam on bunks & seat with Ultra leather
- Removable cabin sole panels in high durability composite
- Main cabin door
- Bi-fold door between head & v-berth